In a token ring, a special bit pattern, known as a token, circulates around the ring when all the stations are idle. Token Ring is formed by the nodes connected in ring format, as shown in the diagram below.The principle used in the token ring network is that a token ... Read More

GSM stands for Global System for Mobile communication. GSM is a mobile communication modem; it stands for global system for mobile communication (GSM). The idea of GSM was developed at Bell Laboratories in 1970.It is a widely used mobile communication system in the world. GSM is an open and digital ... Read More

CIFSCIFS stands for Common Internet File System. It is also known as Server Message Block. It is a network protocol whose most general use is sharing documents on a Local Area Network (LAN). The protocol allows a user to manipulate files just as if they were on the local computer.Operations ... Read More

iSCSI represents Internet Small Computer Systems Interface. It is a transport layer protocol that works on top of the Transport Control Protocol (TCP). It enables block-level SCSI data transport between the iSCSI initiator and the storage target over TCP/IP networks. iSCSI supports encrypting the network packets and decrypts upon arrival ... Read More

DAS stands for Direct-attached storage. It is computer storage that is connected to one computer and not accessible to another. The System of DAS is attached directly to the computer through the HBA (Host Bus Adapter).As compared to NAS devices, its device attaches directly to the server without the network. ... Read More

It is the simplest flow control method. In this, the sender will transmit one frame at a time to the receiver. The sender will stop and wait for the acknowledgement from the receiver.This time (i.e. the time joining message transmitting and acknowledgement receiving) is the sender’s waiting time, and the ... Read More

I2C ProtocolI2C stands for the inter-integrated controller. It is a serial communication protocol that can connect low-speed devices. It is a master-slave communication in which we can link and control multiple slaves from a single master. In this, each slave device has a specific address.SPI ProtocolSPI is an interface that ... Read More

SPI stands for the Serial Peripheral Interface. SPI is a general-objective synchronous serial interface. During an SPI transfer, send and receive data is simultaneously shifted out and in serially. It was created by Motorola in the mid-1980 for inter-chip communication. The SPI is used to authorise a microcontroller to communicate ... Read More

MQTT represents Message Queuing Telemetry Transport. It is a highly lightweight and publish-subscribe messaging transport protocol. This protocol is helpful for the connection with the remote location where the bandwidth is a premium. These features make it useful in multiple situations, including a stable environment such as communication machine to ... Read More

I2C stands for the inter-integrated controller. This is a serial communication protocol that can connect low-speed devices. It is a master-slave communication in which we can connect and control multiple slaves from a single master. In this, each slave device has a specific address.The I2C is developed to overcome the ... Read More